PAL3 System LC version
PAL3 Modules
| Part No. | Description | Compatible | |
|---|---|---|---|
| PAL3-Agitator | Agitator for the incubation and agitation of up to 6x 20mL vials | RTC, RSI, LSI |  |
| PAL3-BarcodeReader | Barcode Reader with 2 active laser scanners for all standard vials containing 1 dimension (1-D) barcode in a horizontal orientation | RTC, RSI, LSI |  |
| PAL3-Centrifuge-2mL | Centrifuge for the centrifugation of up to 8x 2mL vials Maximum speed of 7200 rpm. This corresponds to a RCF of 5000 x g | RTC, RSI, LSI |  |
| PAL3-Centrifuge-Combi | Centrifuge for the centrifugation of 2x 10mL vials, 2x 20mL vials or up to 4x 2mL vials Maximum speed of 4800 rpm. This corresponds to a RCF of 2000 x g | RTC, RSI, LSI | |
| PAL3-Decapper | PAL Decapper Module for opening and closing of initially closed 2mL, 10mL or 20mL vials PALsystem Vials with re-cappable vial caps are highly recommended for multiple opening and closing procedures within a workflow | RTC |  |
| PAL3-DilutorMulti | PAL Dilutor Option | RTC, RSI |  |
| PAL3-DilutorSingle | PAL Dilutor Option | RTC, RSI |  |
| PAL3-FlowCell | Flow-Cell for PALSystem to accommodate up to 6 flow cells, consisting of: 1 pc Holder 88mm 1 pc Flow-Cell Stainless Steel 316 with connectors Swagelok 1/4" 5 pcs Inlet Septa | RTC, RSI |  |
| PAL3-HeatexStirrer | Heatex Stirrer for intensive heating and stirring of 1x 20mL vial without stir bar Specific Heatex Stirrer insert for 10mL vial available (not included) | RTC, RSI |  |
| PAL3-ValveDrive-R | Valve Drive Module for Rheodyne valve (without valve) consisting of: 1 pc Valve Drive Module 1 pc PAL Bus connection cable |
RTC, RSI, LSI |  |
| PAL3-ValveDrive-V | Valve Drive Module for Valco valve (without valve) consisting of: 1 pc Valve Drive module 1 pc PAL Bus connection cable |
RTC, RSI, LSI | |
| PAL3-VortexMixer | Vortex Mixer for the intensive mixing of 1x 2mL, 10 or 20mL vials with an agitation speed between 0-2000 rpm | RTC, RSI, LSI |  |
| PAL3-WashFast | Fast Wash Module for two solvents (Needle Gauge 19 to 26),
Recommended syringe size: 10 - 100µL, consisting of:
1 pc Wash Module with two wash positions and one Waste position 1 pc Pump Module with two solvent pumps 2 pc 1 liter solvent bottles with tubings and frits |
RTC, RSI, LSI |  |
| PAL3-WashFast-HF | HF (High-Flow) Fast Wash Module for two solvents (Needle Gauge 19 to 26),
Recommended for syringe size: 250µL - 10mL, consisting of:
1 pc Wash Module with two wash positions and one Waste position 1 pc Pump Module with two high-flow solvent pumps 2 pc 1 liter solvent bottles with tubings and frits |
RTC, RSI, LSI | |
| PAL3-WashLarge | Large Wash Module for 2x 100mL solvent vials and one waste position | RTC, RSI, LSI |  |
| PAL3-ParkStation-RTC | Park Station for the storage and robotic tool change of up to three PALtools like Liquid, HS, SPME, consisting of: 1 pc Park Station 1 pc Electrical connection cable |
RTC |  |
| PAL3-SolventModule | Solvent Module for 3x 100mL solvent bottles | RTC, RSI, LSI |  |
| PAL3-WashLCMS | Wash Module for LCMS Tool. with two wash positions and one waste position | RTC, RSI |  |
| PAL3-WashStd | Standard Wash Module for up to 4x 10mL solvent vials and 1x 10mL waste vial | RTC, RSI, LSI |  |